SPECIFICATIONS

 

 

Voltage: 12V

 

Battery type: lithium-ion battery

Rated capacity: 2000mAh (14.4Wh)

Inflation pressure: 0.2-10.3ba/3-150psi

Product Name: Mijia Air punm 2

Product Model: MJCQB06QW

Rated input: 5V=2A

product size: 123*75.5*45.8mm

Choice: yes

 

Newest Mijia air pump 2 Portable Smart Digital Tire Pressure Detection Electric Inflator Pump For Bike Motorcycle Car Football,Motorcycle Car Football,electric scooter

Compared with the old Mijia inflatable treasure 1s

★Inflatable battery life increased by about 25.4%, Can replace about 10 tires.

★Gas flow rate increased by about 25%

★The air pressure sensor upgraded to a digital chip, the tire pressure detection accuracy is increased to ±1psi*, the error is smaller, there is no need to rely on the foot to repeatedly check whether it is full.

★The preset pressure is fully charged and stops immediately, saving effort and worry.

★ 6 modes are free to switch elders use no barriers.

★Built-in lithium battery to get rid of wires.

★Lightweight, portable and easy to store.

★Built-in lithium battery

Specifications:

Name:Mijia Air pump 2

Product model : MJCQB06QW

product Weight:about 490G

product size : 123×75.5×45.8mm (bare machine size, without air pipe).

Rated capacity 2000mAh(14.4Wh)

Rated input 5V=2A

Air nozzle size (inside diameter) :

American air nozzle interface Φ6.9mm

French air nozzle conversion head Φ6mm

F ast air nozzle conversion head Φ6.9m

Battery type: lithium-ion battery

Inflation pressure: 0.2-10.3ba/3-150psi

Working temperature: 10℃~45℃

Charging temperature: 5℃~40℃

Storage temperature: -10℃~45℃

Rated capacity: 2000mAh (14.4Wh)

type C Charging （not include cable need inferiorty）

Package Contents:

Inflatable treasure x1

Gas needle x1(,American air nozzle interface Φ6.9mm ,French air nozzle conversion head Φ6mm,Fast air nozzle conversion head Φ6.9mm)

Storage bag x1

Manual（Chinese）X1

Added quick connector conversion head for quick and clean installation.

The newly added quick connector conversion head allows for easy and fast installation of the nozzle. With a wide variety of accessories, it can adapt to more inflation scenes.

 

Built-in lithium battery allows for free inflation anytime and anywhere.

The built-in 2000mAh high-rate lithium battery provides ample power. Without an external power supply, you can say goodbye to cable constraints

Lightweight, Portable, and Easy to Store

 

Weighing only about 490g*, the simple and compact design of the inflator makes it easy to carry around while on the go. Whether you need to store it in your backpack, car, or at home, its small and sleek design won't take up much space.

Accurate Real-time Tire Pressure Display with Automatic Stop

Set your desired pressure value or select a preset mode, and the inflator will do the rest. Once the inflation is complete, it will automatically stop without any need for supervision, making it effortless and worry-free. The digital sensor chip used in the inflator ensures precise tire pressure detection with an accuracy of up to 1psi*.

 

The inflator's hose switch ensures against any accidental activation.

Switch on-Take out the hose,Switch off-Put in the hose

Four-grid Battery Display for Accurate Remaining Power Indication

The inflator precisely displays the remaining battery power with a four-grid indicator

Xiaomi Mijia Portable Electric Air Compressor 2 :The 2nd generation of the air-filling little monster with upgraded swiftness.Pre-set pressure stops automatically when the desired pressure is reached.

Digital tire pressure detection.Inflating pressure can reach up to 150psi.A new generation of air pump with better performance:Compared with the Mi Home Air Pump 1S, this pump has optimized details and improved internal structure. It inflates 25% faster to create a more convenient and efficient air-filling experience.It speeds up by approximately 25% to help you get out of trouble quickly:With a high-power magnetic motor, it can fill up one empty tire in just 8 minutes*. The inflation is more powerful.Inflation speed increased by approximately 25%.Battery life improvement. It can inflate up to 10 tires when fully charged.Hardware configuration upgraded, energy efficiency improved. It can continuously inflate up to 10 tires* when fully charged, and fill two empty tires* continuously.High-precision cylinder body can reach up to 150psi:The air pump adopts a 19mm high-precision alloy casting cylinder body, and the inflation pressure can reach up to 150psi. It takes only 86 seconds* to fill a high-pressure bicycle tire.Pre-set pressure stops automatically and accurately displays real-time tire pressure:Set the desired air pressure value or select the preset mode, one-button inflation, and inflation will automatically stop when it's complete. 6 preset inflation modes make it easy for beginners to operate:Switch between 6 modes, and the default air pressure range is limited to avoid over-inflation. The free mode can memorize the pressure value, set it once, and bid farewell to complex settings.

Added quick connector conversion head for quick and clean installation:The newly added quick connector conversion head allows for easy and fast installation of the nozzle. With a wide variety of accessories, it can adapt to more inflation scenes.Built-in lithium battery allows for free inflation anytime and anywhere:The built-in 2000mAh high-rate lithium battery provides ample power. Without an external power supply, you can say goodbye to cable constraints.Lightweight, Portable, and Easy to Store:Weighing only about 490g*, the simple and compact design of the inflator makes it easy to carry around while on the go. Whether you need to store it in your backpack, car, or at home, its small and sleek design won't take up much space.Accurate Real-time Tire Pressure Display with Automatic Stop:Set your desired pressure value or select a preset mode, and the inflator will do the rest. Once the inflation is complete, it will automatically stop without any need for supervision, making it effortless and worry-free. Built-in Lighting for Nighttime Operation:The increased brightness of the built-in light makes it convenient to operate the inflator during nighttime.The inflator's hose switch ensures against any accidental activation:Switch on-Take out the hose,Switch off-Put in the hose

Four-grid Battery Display for Accurate Remaining Power Indication:The inflator precisely displays the remaining battery power with a four-grid indicator.

 

 

 

*At full charge, this product can inflate a 205/55 R16 car tire from 0 to 2.5 bar in approximately 8 minutes at an ambient temperature of 25°C±2°C.

*At full charge, this product can inflate up to 10 205/55 R16 car tires from 2.0 to 2.5 bar in approximately 2 minutes per tire at an ambient temperature of 25°C±2°

*At full charge, this product can inflate at least 2 205/55 R16 car tires from 0 to 2.5 bar at an ambient temperature of 25°C±2°C.

*Inflation from 0psi to an average of 120psi for a 700c road bike tire takes approximately 86 seconds at an ambient temperature of 25°C±2°C.

*The tire pressure detection accuracy of the Mi Home Inflator 1 is ±2psi, while the Mi Home Inflator 2 has been upgraded to ±1psi.

*The weight of the Mi Home Inflator 2 does not include the weight of the French nozzle conversion head, air needle, quick connect nozzle conversion head, or storage bag, and is approximately 490g.

*The Mi Home Inflator 2 does not come with a Type-C charging cable and power adapter, which users need to purchase separately.

*All data on this page, unless otherwise specified, is sourced from external laboratories. Due to environmental differences, actual usage may vary slightly.